|
|
Yates Spec Pak Wind Turbine Lifting Bridle System
$375.00
YA905WT
The new Spec Pak Wind Turbine Lifting Bridle
System
includes the new Spreader Bar, both by Yates Gear. It was designed for
Wind Turbine rescue techniques that require horizontal transfer of a
patient. Spreader Bar is connected to chest D-rings on Spec Pak. This
technique utilizes two 4:1 Mini Haul or AZTEC kits attached to the
swivel on the spreader bar to move a patient in Hub and Nacelle rescue
situations. Spreader Bar can also be attached 2:1 Pick off strap of the
suspension system to allow for horizontal, semi sitting and
semi-vertical (80 degree) positioning of the patient. This system of
lifting is useful when longer suspension times are anticipated, reducing
the chances of development of suspension syndrome. Lifting bridle is
attached to chest mounted D-rings on Spec Pak. Head, and leg strap
allows for complete stabilization of the patient without the need of a
full litter. Head Strap allows is easily adjustable with use of 6kN
rated Ancra Cam Buckles. Lifting bridle has full strength 22.2 kN
rating. All carabiners and connectors are included.
Complete Bridle Kit Includes:
- Spreader Bar w/swivel and carabiner connectors
- 2:1 Pick off Strap
- Leg Support Section w /Yates-DMM 1835 autolock carabiner.
- Head adjuster strap to adjust patient suspension angle.
- DMM 1162 ANSI carabiner to connect spreader bar to suspension system.
This Yates Spec Pak Wind Turbine Lifting Bridle System
is a Rescue Response Gear Red iBex approved Yates Gear product to fill
your various needs for use in rope rescue and industrial rope access
fall protection when using equipment such as webbing, rope, anchors,
harnesses, helmets, gloves, belay & rappel devices, ascenders,
pulleys, carabiners and other approved hardware in professional
swiftwater, firefighter, canyoneering, work at height, positioning,
suspension and fall arrest when climbing and descending, mast and tower
climb, telecoms, wind turbines and stage rigging . |
|
|
