|
|
Yates Spreader Bar w/Swivel and Carabiners
$225.00 YA905SPREADER
The new Spec Pak Spreader Bar was designed
for Wind Turbine rescue techniques that require horizontal transfer of a
patient. Spreader Bar connects to chest D-rings on the Spec Pak.
This technique utilizes two 4:1 Mini Haul or AZTEC kits attached to the
swivel on the spreader bar to move a patient in Hub and Nacelle rescue
situations. Spreader Bar can also be attached 2:1 Pick off strap of the
suspension system to allow for horizontal, semi sitting and
semi-vertical (80 degree) positioning of the patient. This system of
lifting is useful when longer suspension times are anticipated, reducing
the chances of development of suspension syndrome. Lifting bridle is
attached to chest mounted D-rings on Spec Pak. Head, and leg strap
allows for complete stabilization of the patient without the need of a
full litter. Head Strap allows is easily adjustable with use of 6kN
rated Ancra Cam Buckles. All carabiner and connectors are included.
Spreader Bar w/swivel comes with two DMM 1162 ANSI carabiners to connect spreader bar to suspension system.
The Yates Spreader Bar w/Swivel and Carabiners are a
Rescue Response Gear Red iBex approved Yates Gear product to fill your
various needs for use in rope rescue and industrial rope access fall
protection when using equipment such as webbing, rope, anchors,
harnesses, helmets, gloves, belay & rappel devices, ascenders,
pulleys, carabiners and other approved hardware in professional
swiftwater, firefighter, canyoneering, work at height, positioning,
suspension and fall arrest when climbing and descending, mast and tower
climb, telecoms, wind turbines and stage rigging . |
|
|